Piercing
Adds 3D metal piercings to your face that stay on as you move and make faces, up to nine at once. Say the style and the spot, for example a silver hoop in the septum and a stud in one nostril.
Hats, glasses, hair, ears, costumes, and accessories for the head and body.
Made with this blockInputs
pieceCountintNumber of piercings shown, 0..9. Piercing 1 uses the inputs without a number (piercingType, placement, color, size, thickness, roughness, position, rotation, customAnchor); piercing N (2..9) uses piercingNType, piercingNPlacement, piercingNColor, piercingNSize, piercingNThickness, piercingNRoughness, piercingNPosition, piercingNRotation and piercingNAnchor. Slots above the count are hidden. Missing or invalid values fall back to 1.
piercingTypeintPiercing 1 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
placementintPiercing 1 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at customAnchor. Do not pass other values.
colorvec4Piercing 1 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
sizefloatPiercing 1 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
thicknessfloatPiercing 1 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
roughnessfloatPiercing 1 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
positionvec3Piercing 1 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
rotationvec3Piercing 1 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
customAnchorvec2Piercing 1 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
piercing2TypeintPiercing 2 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
piercing2PlacementintPiercing 2 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at piercing2Anchor. Do not pass other values.
piercing2Colorvec4Piercing 2 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
piercing2SizefloatPiercing 2 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
piercing2ThicknessfloatPiercing 2 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
piercing2RoughnessfloatPiercing 2 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
piercing2Positionvec3Piercing 2 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
piercing2Rotationvec3Piercing 2 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
piercing2Anchorvec2Piercing 2 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
piercing3TypeintPiercing 3 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
piercing3PlacementintPiercing 3 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at piercing3Anchor. Do not pass other values.
piercing3Colorvec4Piercing 3 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
piercing3SizefloatPiercing 3 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
piercing3ThicknessfloatPiercing 3 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
piercing3RoughnessfloatPiercing 3 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
piercing3Positionvec3Piercing 3 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
piercing3Rotationvec3Piercing 3 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
piercing3Anchorvec2Piercing 3 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
piercing4TypeintPiercing 4 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
piercing4PlacementintPiercing 4 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at piercing4Anchor. Do not pass other values.
piercing4Colorvec4Piercing 4 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
piercing4SizefloatPiercing 4 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
piercing4ThicknessfloatPiercing 4 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
piercing4RoughnessfloatPiercing 4 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
piercing4Positionvec3Piercing 4 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
piercing4Rotationvec3Piercing 4 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
piercing4Anchorvec2Piercing 4 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
piercing5TypeintPiercing 5 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
piercing5PlacementintPiercing 5 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at piercing5Anchor. Do not pass other values.
piercing5Colorvec4Piercing 5 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
piercing5SizefloatPiercing 5 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
piercing5ThicknessfloatPiercing 5 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
piercing5RoughnessfloatPiercing 5 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
piercing5Positionvec3Piercing 5 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
piercing5Rotationvec3Piercing 5 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
piercing5Anchorvec2Piercing 5 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
piercing6TypeintPiercing 6 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
piercing6PlacementintPiercing 6 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at piercing6Anchor. Do not pass other values.
piercing6Colorvec4Piercing 6 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
piercing6SizefloatPiercing 6 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
piercing6ThicknessfloatPiercing 6 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
piercing6RoughnessfloatPiercing 6 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
piercing6Positionvec3Piercing 6 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
piercing6Rotationvec3Piercing 6 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
piercing6Anchorvec2Piercing 6 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
piercing7TypeintPiercing 7 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
piercing7PlacementintPiercing 7 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at piercing7Anchor. Do not pass other values.
piercing7Colorvec4Piercing 7 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
piercing7SizefloatPiercing 7 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
piercing7ThicknessfloatPiercing 7 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
piercing7RoughnessfloatPiercing 7 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
piercing7Positionvec3Piercing 7 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
piercing7Rotationvec3Piercing 7 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
piercing7Anchorvec2Piercing 7 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
piercing8TypeintPiercing 8 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
piercing8PlacementintPiercing 8 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at piercing8Anchor. Do not pass other values.
piercing8Colorvec4Piercing 8 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
piercing8SizefloatPiercing 8 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
piercing8ThicknessfloatPiercing 8 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
piercing8RoughnessfloatPiercing 8 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
piercing8Positionvec3Piercing 8 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
piercing8Rotationvec3Piercing 8 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
piercing8Anchorvec2Piercing 8 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
piercing9TypeintPiercing 9 style. Options: 0 = Stud, 1 = Hoop, 2 = Horseshoe, 3 = Curved Barbell. Do not pass other values.
piercing9PlacementintPiercing 9 spot on the face. Options: 0 = Left Nostril, 1 = Right Nostril, 2 = Septum, 3 = Lower Lip, 4 = Left Eyebrow, 5 = Right Eyebrow, 6 = Custom. Left and right are as seen in the camera image. Custom (6) places the piece at piercing9Anchor. Do not pass other values.
piercing9Colorvec4Piercing 9 metal color as [r, g, b, a] in 0..1; only RGB is used, alpha is treated as 1.
piercing9SizefloatPiercing 9 ring diameter or barbell length in cm; a stud bead is 32% of it. Hard limits 0.4..2; 0.6..1.2 looks natural.
piercing9ThicknessfloatPiercing 9 wire thickness in cm. Hard limits 0.035..0.2 and at most 22% of size; 0.06..0.12 looks natural.
piercing9RoughnessfloatPiercing 9 metal roughness. Hard limits 0.05..0.8; 0.1..0.25 is polished, 0.4 and above brushed or matte.
piercing9Positionvec3Piercing 9 offset in cm from its placement. Keep [0, 0, 0]. z moves the piece deeper or out and is clamped to -0.5..1.0; x and y only apply to preset placements.
piercing9Rotationvec3Piercing 9 rotation offset in degrees (x tilt, y turn, z roll) on top of the placement's own angle. Keep [0, 0, 0].
piercing9Anchorvec2Piercing 9 Custom spot as a face-mesh UV point [u, v], each axis 0.02..0.98; used only when the placement is Custom (6). u 0.5 is the face center, lower u is image-left. v grows UPWARD (0 chin, 1 forehead). Examples: upper lip [0.46, 0.38] and [0.54, 0.38], image-left cheek [0.34, 0.5], image-right cheek [0.66, 0.5]. v 0.62 is eye level, never use it for the mouth. Use the landmark list in the block notes.
skinOcclusionbooleanIgnored: skin occlusion is always on. Leave it unset.
More in 3D Objects & Wearables
- 3D Object Upper BodyRests one small 3D object on your shoulder, such as a parrot or a tiny robot. Choose the left or the right shoulder, and how big the object is.
- Detailed 3D HatPuts a 3D hat on your head, chosen from a set of ready-made hats in fixed colors. Ask for one by name, for example a brown cowboy hat or a red knit beanie.
- Eyewear 3DAdds 3D glasses over your eyes. Pick aviator, cat-eye, round, wayfarer, goggles, heart shaped or eye patch, then say the frame look you want.
- GlassesPuts 3D glasses on your face, in many shapes and styles, from sunglasses to clear frames. Say the pair you want, for example round leopard print sunglasses.
- Headwear Texture 3DPuts 3D headwear on your head. Ask for the type you want, for example a beret, a cowboy hat, a crown or a halo.
- Logo CapAdds a 3D baseball cap on your head. Choose the two cap colors, and put a picture or your own text on the front.
- Selfie AttachmentsBuilds a 3D object from your words and puts it on your head. Say what you want, for example a pink flower crown or a panda hugging your face.
- Selfie Attachments From ImageTurns a picture you give it into a 3D object on your head. Upload a photo of the thing you want, for example a hat, a helmet or a mask.
